Sinclair Priming Tool Belted Mag Wsm Ultra Mag Priming Tool Head

Sinclair Priming Tool Belted Mag Wsm Ultra Mag Priming Tool Head

The Sinclair Priming Tool is one of the finest tools we manufacture. Handloaders around the world have told us "this is the best priming tool in the world". The Sinclair Priming Tool is manufactured from the finest materials available. The main body, head, and punch housings are all made of stainless steel, the handle is machined from aircraft grade aluminum, and the pins and pushrod are hardened. These materials insure the owner a lifetime of trouble-free use. The Sinclair Priming Tool comes complete with housings and punches for both large and small primers. The tool head utilizes Sinclair Priming Tool Shellholders and locks the case head square to the priming punch. The Mfg: Sinclair International

00125) for very precise amount of crush. All stainless steel components with billet aluminum. The leverage of the tool is outstanding, yet extremely sensitive so you can feel the primer entering the primer pocket and bottoming. Perfect priming tool. 749013848 Belted Mag, WSM, Ultra Mag Priming Tool Head Mfr Part: 3006094 The Sinclair Priming Tool is one of the finest tools we manufacture. The Sinclair Priming Tool comes complete with housings and punches for both large and small primers. (includes one die and three pre-selected bushings). Priming Tools Reloading Dies Reloading Equipment. The RCBS Universal Hand Priming Tool is the best Ive used so far.

Unique top priming device seats primers to factory specifications. The tool head utilizes Sinclair Priming Tool shellholders (see chart below) and locks the case head square to the priming punch. This can be done with a Dremel.

The driver is universal to the Sinclair system and will work with all the caseholders.

Handloaders.

This generally applies to the larger belted magnums.

Sinclair Priming Tool Belted Mag Wsm Ultra Mag Priming Tool Head Details
Price $19.99
SKU 3006094
Manufacturer Sinclair International
Type Reloading>Priming Tools>Priming Tool Accessories
Category Mature > Weapons > Gun Accessories
Weight 0.25
Shipping Weight 0.25
In Stock Yes

A description and benefits of the Sinclair Priming Tool (1:13). Pros vs Other Hand Primers Ive used: - No shellholders required. Lee Precision, New Auto-Prime Change Primer Adapter - : 1:31 Lee Precision Inc 5 859. Magazines Muzzle Accessories Navigation Non-Lethal Defense Phone Accessories Safety Gear. RCBS Dies 44mag Roll Crimp 18608. Lee R5 Universal shell holder used in most brands of reloading presses. Priming Tools - LEE PRIMING TOOLS AND SHELL HOLDER 4 GREAT WAYS TO. I have installed about 600-700 primers with this tool.

Priming Tool Shell Holders. 3 479,89 RUB. 1 Lyman Handy-Prime Universal Priming Tool 7777810 Reloading Tools and Gauges -Lyman. This Priming Tool moves the primer 1 thou per click (.

The priming tools and accessories manufactured by rcbs make a Great addition to your Gunsmithing workshop. 749-013-848WS Belted Mag, WSM, Ultra Mag Priming Tool Head. Our 21st Century Shooting Bench Rest Priming Tool uses our special shell holders that can be ordered below. Priming Tools. The new Auto-Prime XR eliminated the primer brand restriction so any brand is now usable. When you need the best reloading primer tools, make Midsouth Shooters your one-stop headquarters. Midsouth has priming tools or progressive presses and turret style as well as all of the accessories to make priming your brass a breeze. The Sinclair Driver and Caseholder system is designed to hold and turn your case while you are neck turning, cleaning case necks.

The Sinclair Priming Tool is one of the finest tools we manufacture. For WSMs, 7mm Rem Mag, 303 British, 480 Ruger and similar cases. 749013845 223 Family Priming Tool Head : 3006091. Note: where two numbers are marked, the first number is the better choice. Proper priming is one of the most critical operations in the reloading process. Our Universal Caseholder enables you to use this.

Other customers viewed

Sinclair Priming Tool Shell Holders Stainless Shellholder 30 M 1 Carbine 22 Hornet  

Sinclair Priming Tool Shell Holders Stainless Shellholder 30 M 1 Carbine 22 Hornet

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Mfg: Sinclair International

View Product

 
Price
Clymer Rimmed Belted Rifle Chambering Reamers Belted Finisher Style Reamer Fits 375 H H Mag  

Clymer Rimmed Belted Rifle Chambering Reamers Belted Finisher Style Reamer Fits 375 H H Mag

Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. Mfg: Clymer SPECS: RIFLE REAMERS - 6, right-hand cutting, straight flutes. Solid pilot, integral throat. Stocked in Rougher and Finisher. 7/16" round shank with 3/8" square drive. ¼" round shank on .22 RF. ORDERING: Advise: 1) Stock #. 2) Cartridge Caliber and Name.

View Product

 
Price
Grace Usa Gun Care Tool Set Win 97 Colt Saa Tool Set  

Grace Usa Gun Care Tool Set Win 97 Colt Saa Tool Set

Never get caught without essential gunsmithing tools again. Complete 17-piece tool set, in a handy, padded, vinyl case, carries easily to the range; lies flat on the bench. Contains the tools you need for quick field repairs: eight, fixed blade screwdrivers with parallel ground tips fit most gun screws; eight, non-marring brass pin punches and an 8 ounce brass hammer help provide safe removal and installation of the most commonly found assembly pins. Mfg: Grace Usa SPECS: Case - vinyl, black. 81/2" (21.6cm) x 11" (28cm). Hammer - 8 oz. (226 g), 1" (2.5cm) dia. x 2" (5.1cm) long head, 91/4" (23.5cm) hickory handle. Punches - brass, 5/16" hex stock, parallel shaft. 1/16", 3/32", 1/8", 5/32", 3/16", 7/32&q

View Product

 
Price
Sinclair International 17 20 Caliber Piloted Flashhole Deburring Tool  

Sinclair International 17 20 Caliber Piloted Flashhole Deburring Tool

Our new 17 and 20 caliber flash hole deburring tool utilizes stainless steel neck pilots to index off of the case mouth to ensure case -to -case uniformity of chamber depth. Will not work with neck pilots larger than 20 caliber. Pilots sold separately. Mfg: Sinclair International

View Product

 
Price
Brownells Revolver Range Rods Rod Head For 41 Mag  

Brownells Revolver Range Rods Rod Head For 41 Mag

Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - "accuracy jobs" . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer "why"!The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns whic Mfg: Brownells SPECS: 10½" (26.7cm) long handle. 2½" (6.3cm) long heads made of steel hardened to Rc 52-54. Includes instructions. Heads interchange on handle except .17 Cal. Range Rod Handle fits only the .17 Cal. Range Rod Head. Combo includes Handle, one (1) Head and Instructions. Mast

View Product

 
Price
Remington Model 700 Long Action Ultra Mag Carbont Steel Receiver Only Model 700 Long Action Ultra Mag Carbon Steel Receiver Only  

Remington Model 700 Long Action Ultra Mag Carbont Steel Receiver Only Model 700 Long Action Ultra Mag Carbon Steel Receiver Only

Factory Remington Receiver, with no other components. Ready for blue-printing or assembly with custom components. Machined from carbon steel, and featuring a matte blued finish. Mfg: Remington SPECS: Receiver - Carbon steel, blued finish (CS) 1-1/16"-16 tpi thread. DOES NOT include bolt, trigger, receiver plug screws, recoil lug, triggerguard, triggerguard screws, and magazine components. RECEIVER ONLY.

View Product

 
Price
Gunline Barrel Bedding Tool 1 Bedding Tool  

Gunline Barrel Bedding Tool 1 Bedding Tool

Perfect, chatter-free cut, shaves out excess wood, leaves barrel channel smooth and ready for barrel without gouging, rasping or final sanding. Cushioned-cutter design keeps hardened steel cutter discs at correct angle to remove wood without "digging in" regardless of amount of pressure. A favorite with pros. Mfg: Gunline SPECS: 10" (25.4cm) overall. Cut length approximate 1¼" (3.2cm). 7/8" and 1" diameter replacement cutters are sold 9 per pak, all other sizes are sold 11 per pak. Bbl. Bedding Tool Set includes ½", 9/16", 5/8", 11/16" and ¾" bedding tools complete with handles and cutter

View Product

 
Price

Contact Us